Comments on: Basic IP Phone Configuration on Cisco Call Manager Express

By: BlogAdmin

BlogAdmin — Sat, 21 Nov 2009 15:37:34 +0000

You can see the following cisco link for more information about configuring Music on Hold: CME-MOH You will need to configure the command multicast-moh under the ephone: ephone 1 multicast-moh

By: asad

asad — Sat, 21 Nov 2009 09:45:32 +0000

this is configuration of My Router Config Dear BlogAdmin Please help me to solve the problem

sho
Router#show run
Router#show running-config
Building configuration…

Current configuration : 8011 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
ip subnet-zero

no ip dhcp use vrf connected
–More– ip dhcp excluded-address 10.15.100.1 10.15.100.10
!
ip dhcp pool test-Voice
network 10.15.100.0 255.255.255.192
default-router 10.15.100.1
option 150 ip 10.15.254.1
!
!
!
voice-card 0
no dspfarm
!
!

!
–More– !
!

username yahoo privilege 15 password 0 yahoo
!
!

interface GigabitEthernet0/0
no ip address
duplex full
speed 100
media-type rj45
negotiation auto
!
interface GigabitEthernet0/0.15
–More– encapsulation dot1Q 15 native
ip address 10.15.254.1 255.255.255.0
no snmp trap link-status
!
interface GigabitEthernet0/0.516
encapsulation dot1Q 516
ip address 10.15.100.1 255.255.255.192
no snmp trap link-status
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
media-type rj45
negotiation auto
!
ip classless
!
!
ip http server
no ip http secure-server
!
–More– !
!
!
!
control-plane
!

!
!
!
telephony-service
load 7971 SCCP70.8-3-3S.loads
load 7970 SCCP70.8-3-3S.loads
max-ephones 20
max-dn 20
ip source-address 10.15.254.1 port 2000
auto assign 1 to 20
system message Asadullah Wouria
max-conferences 12 gain -6
moh music-on-hold.au
multicast moh 239.1.1.1 port 2000
web admin system name asad password asadkhan
dn-webedit
time-webedit
transfer-system full-consult
create cnf-files version-stamp Jan 01 2002 00:00:00
!
ephone-dn 1
number 9000
!
!
ephone-dn 2
number 9001
!
!
ephone-dn 3
number 9002
!
!
ephone-dn 4
number 9003
!
!
ephone-dn 5
number 9004
!
!
ephone-dn 6
–More– number 9005
!
!
ephone-dn 7
number 9006
!
!
ephone-dn 8
number 9007
!
!
ephone-dn 9
number 9008
!
!
ephone-dn 10
number 9009
!
!
ephone-dn 11
number 9010
!

!
ephone 1
mac-address 001F.9EAE.142F
type 7912
button 1:1
!
!
!
ephone 2
!
!
!
ephone 3
–More– !
!
!
ephone 4
!
!
!

!
!
–More– line con 0
stopbits 1
line aux 0
stopbits 1
line vty 0 4
privilege level 15
login local
!
scheduler allocate 20000 1000
!
end

By: asad

asad — Sat, 21 Nov 2009 07:04:41 +0000

I worked on Unicast mode it is not working can you please help for the multicast mode mean how to configure the network to suppor multicast.

By: BlogAdmin

BlogAdmin — Thu, 19 Nov 2009 18:01:31 +0000

Yes it will work. Music on Hold works both with unicast and multicast.

By: asad

asad — Wed, 18 Nov 2009 06:05:25 +0000

Dear Blog Admin you mean that if we are not echoing the command of multicast moh 239.1.1.10 port 2000 route 192.168.1.1 will it play music when keeping somebody on hold just with this command

telephony-services
moh music-on-hold.au

By: BlogAdmin

BlogAdmin — Tue, 17 Nov 2009 14:01:38 +0000

As far as I know you don’t need to configure multicast for Music on Hold. The music stream is transfered as unicast from the CallManager system to the phone.

By: asad

asad — Tue, 17 Nov 2009 09:26:03 +0000

how to configure the network to support multicast because i need to configure Music on hold on CME Router can anyone help me the command